top of page

Honda XL125R Scrambler Azfer Replica

Usually I call our shop as a small motorcycle studio. Generally speaking, the motorcycles that build my reputation are motorcycles that I had in mind and that I wanted to do, such as the BMW K75 Street Tracker or the Yamaha XJ600 Café Racer that can be seen on my website. Customers that look for me to build their motorcycles usually feel inspired by the motorcycles they see on my website or on the internet –Instagram, Tumblr or specialized websites such as Pipeburn or Bike Exif – but when the moment of truth arrives, they usually restraint creativity and at the end final build is much more conventional although probably more useful in a daily basis.

Luckily for the studio, sometimes a customer is willing to let himself be carried away by his passion and challenge th shop with a risky and special project. This is the case of this simple Honda XL12R transformed into a very striking and different Tracker.

But the history of this bike is not casual nor does it go through any particular development process. Because, what happens if you suddenly fall in love with a motorcycle that you have seen on the internet and you want it with all your heart? What happens when that motorcycle cannot be legalized in your country because is a model that was never sold in there?  Also, maybe some of its solutions are not legal either, even if you could bring the bike? A motorcycle that – well – you could never legally ride around your city even if you could afford it?

This was the situation when the customer contacted us and asked for advice. We answered that it would be possible to make a replica of the motorcycle with a different donor bike available in our country and make it Street legal build that would allow him to enjoy it without any issue.

The bike to be replicated is none other than the Bombardero from the Mexican manufacturer Azfer. A truly spectacular motorcycle built over a small engine Honda with an unmistakable style.

To do this, we looked for the donor bike as close as possible to Azfer's bike and the choice was the Honda XL125R. After removing all the enduro style plastics and analyzing what would be the steps to take to make the final build as close as possible of the Azfer’s Bombardero, we made the following shopping list:

1- Change the 17” and 18” rims for 16” and wider ones that house the huge 130mm multipurpose tires so noticeable of the original build

2- Change the front end for a wider one since the original did not admit a 130mm wheel

3- Change the tank for that of a Suzuki GN125 identical to that of the Bombardero

4- Modify the frame to achieve the same line as the Bombardero but following our country rule

5- Add to the design the parts that would allow the motorcycle to be legalized in Spain without losing the original line of the original build – fenders, dimensions, lights placement, etc.

Once the steps to follow were defined, we start to looking for a front end – complete suspension, trees and steering axle – that we got from a Yamaha SR125. The steering axle was slimmed in the lathe and adding new bearings to adapt it to the Honda frame neck. Next, the original wheels were disassembled and the 16” rims were mounted on the 36-spoke hubs. Once the tires were mounted – two multipurpose DURO Median 130/90-16 tires pretty knobbies – the naked bike was mocked up evaluate the work to do over the frame. With the tank of the Suzuki GN125 in place, first we realize was the need to move tank mounts forward, bringing it as close to the handlebar as possible. On the other hand, the drop in the middle área of the frame had to match the side line of the original build. The legislation in Spain does not allow to modify the frame of a motorcycle just than in the rear end. Anything that involves modifying a chassis from – let's say – the rear shocks mounts has a high risk of not being legalized. That is why we decided not to touch the lateral mounts of the frame, although they should be as empty as possible to leave that area in the air and thus reveal the rear shock absorber, and its spring painted in red. After removing the air filter, all the electronic stuff was visible and it was a real challenge to hide it on a motorcycle that originally had a lot of plastic to hide it. Our philosophy is to try to maintain the stock electrical wiring if it is in good condition, due to reliability issues and above all because we do not like the customer to depend exclusively on us for any problem that may come. In this case, the customer lives 700 km from our workshop and things like a simple fuse could force him to send us the motorcycle because any workshop in the area dares to touch an electric setup that they have not done and that cannot be monitored with the original wiring diagram.

So to keep the electrical wiring – battery, starter relay, fuse box and control unit – and incidentally give a line of continuity to the side of the motorcycle, we closed the area where the new subframe joined the original frame with sheet steel, creating a place for the new Lithium battery and most of the wiring and fuses.

Finally, the rear part of the frame was cut to get closer to that of the Bombardero, even shorter and more radical.

As the rule in Spain is mandatory about fenders both front and rear, both were hand made in fiberglass for the rear and mirror-polished aluminum for the front. Likewise, a support for the license plate was fabricated where the dual-function indicators were integrated. Up front, a Puig LED headlight and a Daytona digital odometer complete the setup. Custom-made seat upholstered by the client himself – a well-known motorcycle seat upholsterer in the country – black paint for the frame and wheels, gas tank and rear fender with the same colors as the Azfer’s Bombardero.  Huge White Scrambler lettering on the tires complete the replica. Next, enjoying the ride.

CONTACT with us

If you liked any of our projects and you wonder how much it may cost or you are interested in some of our ideas for your motorcycle, do not hesitate to let us know.


bottom of page